Guide to Installing PDLC Smart Film

PDLC smart film, also known as switchable glass or smart glass, is a revolutionary technology that transforms ordinary glass into a controllable privacy screen. With the application of an electric current, PDLC smart film can change from transparent to opaque, providing instant privacy on demand. This innovative material is becoming increasingly popular in a variety of applications, including office spaces, conference rooms, healthcare facilities, and residential homes.

If you’re considering installing PDLC smart film in your building, this comprehensive guide will walk you through the entire process, from preparing the surface to connecting the power supply.

What you’ll need:

1,PDLC smart film

2,Glass cleaning solution

3,Lint-free cloths

4,Razor blade or box cutter

5,Squeegee

6,Power supply

7,Wire strippers

8, Wire connectors

Step 1: Prepare the surface

Before you begin installing the PDLC smart film, it’s crucial to ensure that the glass surface is clean and free of any dirt, debris, or grease. Use a glass cleaning solution and lint-free cloths to thoroughly clean the entire surface. Once the glass is clean, allow it to dry completely.

Step 2: Cut the film to size

Carefully measure the glass surface and cut the PDLC smart film to the exact dimensions. Use a razor blade or box cutter to make precise cuts. For best results, lay the film on a flat surface and use a straight edge as a guide.

 

Step 3: Apply the film

Peel off a small section of the protective liner from the back of the PDLC smart film. Align the film with the top edge of the glass and carefully position it onto the surface. Use a squeegee to smooth out any air bubbles or wrinkles, working from top to bottom and side to side.

Step 4: Connect the power supply

Locate the power supply and connect the wires to the corresponding terminals on the PDLC smart film. Use wire strippers to strip a small section of insulation from the ends of the wires. Secure the wires to the terminals using wire connectors.

 

Step 5: Test the installation

Once the power supply is connected, turn it on and test the PDLC smart film. Switch the power on and off to ensure that the film transitions smoothly from transparent to opaque and vice versa.

Additional tips:

For larger installations, consider working with a professional installer.

If you’re not comfortable working with electrical wiring, consult a qualified electrician.

Always follow the manufacturer’s instructions for your specific PDLC smart film product.

PDLC smart film offers a multitude of benefits for both residential and commercial applications. With its ability to control privacy, enhance security, and reduce energy consumption, PDLC smart film is a valuable addition to any building. By following the steps outlined in this guide, you can easily install PDLC smart film and transform your space into a more functional and stylish environment.

Here is a video link to show more details. https://youtu.be/ezQiCWe-Ylw

For more technical support, please feel free to contact us at info@sourceglas.com